3-Point Hitch Control System; 3-Point Hitch Control System; Remote Hydraulics; Remote Hydraulics - Kioti CK2810 Manual

3-POINT HITCH CONTROL SYSTEM

POSITION CONTROL
(1) position Control lever
(A) lowering
1. The position control lever is used
to lift or lower the lifting arm (lower
link) of the 3-point hitch.
2. pushing the lever forward lowers
the lower link while pulling the le-
ver backward lifts the lower link.
3. The height of the lower link is pre-
cisely controlled proportional to the
position of the lever.
4. The lower link is lifted by the hy-
draulic energy of the tractor while
M56(TB110)(CK2810)-호주판-OM-05.ind21 21
it is lowered by potential energy
of its own weight. Therefore, the
implement cannot be lowered by
the hydraulic pressure.
5. Therefore, the implement attached
to the lower link may be lifted by
protrusion on the ground when it
is lowered to the ground. This is
know as FlOATING.
196O504C
OpERATION

REMOTE HYDRAULICS

DOUBLE ACTING vALvE
(1) Double Acting valve lever
(A) port A (B) port B
KIOTI supplies two types of the
double acting valves by region: self-
return type and detent type.
• For the self-return type double act-
ing lever, it returns to its original
position to block the hydraulic fluid
when it is pushed/pulled and then
released. However, this type of
double acting valve lever should be
pulled or pushed continuously for
operation which is suitable for an
implement with a short operating
time, such as the hydraulic cylinder.
5
- 1
S35O429A
5
2012-10-15 오후 5:34:41