Cruise Pto Warning Lamp; Cruise Pto Warning Lamp; Quick-Turn Indicator(If Applicable); Quick-Turn Indicator (If Applicable) - Kioti DK4810 Manual

4
20 dK4810/5310/5810(hs)
-
warning
in the warning level 3 (cel lamp
•
on), both manual and automa-
tic regeneration processes can-
not be performed.
• when the dpF warning lamp co-
mes on, make sure to perform the
manual regeneration as the active
regeneration cannot be performed.
• enabling condition for manual
regeneration
- clutch engaged
- brake on
- engine rpm idle state
if any of the above conditions is
•
not met during regeneration, the
regeneration mode is deactivated.
other general operation can-
•
not be performed during the
manual regeneration process.
during regeneration, the engi-
ne speed is maintained
- at 1,500 rpm for 10 minutes
- at 2,600 rpm for 25 minutes
- at 1,600 rpm for 3 minutes
TD200-호주향-DK4810,5310,5810(HS)-020 20

cruise pto warning lamp

the switch is used to set the pto
rpm. with the pto cruise button set
in the on position, pressing the set
(-) button turns on this lamp.
QuicK-turn indicator
(iF applicable)
td2O420A
this indicates activation of the quick-
turn function.
this function is activated only when
the driving mode selection switch is
in the "Qt" position and the steering
angle of the front wheels is over 35
˚. This function is used to reduce the
turning radius by increasing the rota-
tion speed of the outer front wheel,
increasing the turning performance
in the 4wd operation.
td2O421A
2015-02-11 오후 2:58:06