Universal Joint) - Kioti DK4810 Manual

6
 dk4810/5310/5810(hs)
-
REMOvAL AND INsTALLATION Of 3-POINT HITCH IMPLEMENT
(INCLuDINg CONNECTION Of uNIvERsAL jOINT)
(1) implement support (2) implement pin
1. place implement on the level
ground.
2. drive the tractor backward to move
as close as possible to an imple-
ment (Approx. 5 cm). then, adjust
the height of the lower link to be par-
allel to the pins of the implement.
3. place the shift levers in the neutral
position, stop the engine and apply
the parking brake.
TD200-호주향-DK4810,5310,5810(HS)-02 2
H61O608b
(1) check link
4. lengthen the chain by turning the
check link turn buckle.
H61O601A
(2) turn Buckle (1) turn Buckle
(3) lower link
(5) lynch pin
5. first install the left lower link to the
implement pin and insert lynch pin
into the hole and turn the ring to
hold implement pin securely.
6. install the right lower link to the
implement pin and insert lynch pin
into the hole and turn the ring to
hold implement pin securely.
H61O615A
(2) lift rod (rh)
(4) implement pin
2015-02-11 오후 3:07:26