Kioti DK4810 Manual page 130

(1) top link (2) top link Bracket
(3) snap pin (4) top link hook
7. install the top link to the top link
hole of the implement. loosen the
lock nuts of top link and turn the
top link handle to adjust the length
of it as needed. Align the pin holes
for top link and top link hole on the
implement to insert the set pin.
insert the snap pin into the set pin
hole securely to hold the set pin.
TD200-호주향-DK4810,5310,5810(HS)-03 3
H61O616A-2
(1) implement support
8. raise up the implement by posi-
tion control of tractor. remove the
implement support as needed. Ali-
gn the implement by adjusting the
length of the check chains on both
sides. tighten the lock nuts on the
check chain securely.
9. Adjust the tip angle of implement by
adjusting the length of top link. ti-
ghten the top link lock nuts securely.
3-point hitch implement And loAder operAtion
10. Adjust the balance of implement
by adjusting the length of lift rod
(rh). tighten the turn buckle
lock nut of lift rod (rh) securely
afterward.
H61O608A
6

-
5 6
2015-02-11 오후 3:07:27