Kioti DK4810 Manual page 64

4
10 dK4810/5310/5810(hs)
-
4wd operation
the 4wd function is used to increa-
se traction power by driving the front
and rear wheels (4 wheels). to en-
gage the 4wd, press the upper sec-
tion of the 4wd switch. as the 4wd
operation is performed by hydraulic
pressure, a simple operation of the
switch can control it.
the 4wd function is useful under the
following conditions:
1. when strong traction force is re-
quired in a humid area.
2. when towing a trailer or using a
loader.
3. when working on sand.
4. when the tractor is pushed forward
by repulsive force from the rotary
tiller on hard soil.
5. When tilling a field or moving over
a field bank.
TD200-호주향-DK4810,5310,5810(HS)-010 10
caution
to avoid accidents:
• do not activate the 4wd fun-
ction while driving on a road.
the 4wd should not be used
on a paved road as tires can
be worn faster.
• while the 4wd is engaged, dri-
ve the vehicle with low speed
as steering and braking cha-
racteristics may differ.
• the 4wd can be activated even
while the vehicle is moving.
however, noise or shift shock
may occur during 4wd enga-
gement in this case. to ensure
safe driving, it is recommended
to engage the 4wd after stop-
ping the machine completely.
how to use QuicK-turn Function
1. to activate the quick-turn function,
press the switch downward.
2. when operating the switch to acti-
vate the quick-turn function, make
sure that the front wheels are in
the straight ahead position.
3. as a safety measure, the quick-
turn function cannot be activated
when the range shift lever is set
to the high speed position and the
vehicle speed is over 6 km/h.
4. Make sure to set the switch to the
2wd or 4wd position before lea-
ving the field.
5. be sure to select the 2wd during
driving, as 4wd or quick-turn can
cause an unexpected accident du-
ring driving.
6. never make a sharp turn during
driving.
2015-02-11 오후 2:58:02