Factory And User Settings - ABB EL6010 Operator's Manual

Factory and User Settings

Factory and User
Settings
34
The following table lists the parameter settings made at the factory.
The operator can enter any on-site or application-specific parameter changes in
the column at the right.
Parameter
Zero setpoint
Span setpoint
Filter
Measuring range
Active TC component
Limit 1
Limit 2
Limit 1 hysteresis
Limit 2 hysteresis
Modbus baudrate
Modbus address
Modbus type
EL6010 Gas Analyzer in Category 2G Operator's Manual
Factory Setting User Setting
Depending on the
analyzer unit type
OFF < 0
OFF < 0
0
0
19200
1
RS232
42/24-30 EN Rev. 1