Factory Settings - ABB EQmatic Product Manual

ABB EQmatic
Device technology

Factory settings

To reset the device to the factory settings, an administrator must have access to the user interface (for
more information see:
or use the Reset button (for more information see
Caution
This function allows you to delete all data and user-specific information from the system. The system is
reset to its supplied state. The most recently installed system update is retained. The following data are
reset to the factory settings or deleted:
•
•
•
•
•
3 Commissioning P.
Devices/meters added to the system, and stored meter data
Meter configurations and metering structure configured
Users and associated information (users and passwords are reset to the factory settings)
All system settings
SSL certificates (if any)
23). To restore the factory settings, go to System > Erase data
2.5.2 Resetting the device P. 20).
QA/S x.yy.1 | 2CDC512090D0202 21