Table of Contents
Advertisement
Grey Headline (continued)
Command reference - xCommand
The xCommand group of commands are used
to add and delete items and issue system
commands.
The following pages list all the xCommand
commands currently available on the VCS.
To issue a command, type the command as
shown, followed by one or more of the given
parameters and values. The valid values for
each parameter are indicated in the angle
brackets following each parameter; these are
explained opposite.
To obtain information about using each of the
xCommand commands from within the CLI:
type xCommand or xCommand ? to return
•
all current xCommand commands available
on the VCS.
type xCommand ?? to return all current
•
xCommand commands available on the
VCS, along with a description of each
command, a list of its parameters, and
for each parameter its valuespaces and
description.
type xCommand <command> ? to return
•
a description of the command, a list of its
parameters, and for each parameter its
valuespaces and description.
Overview and
System
Introduction
status
configuration
D14049.07
March 2010
The valid value for this
parameter is an integer.
The minimum and maximum
values are shown within the
angle brackets.
The valid value for this
parameter is a string. The
minimum and maximum
number of characters is
shown after the S.
When issuing this command,
the string must be typed in
double quotes.
The valid values for this
parameter are one of the
options shown within the
angle brackets.
(r) indicates that this is a
required parameter. The (r) is
not part of the command.
VCS
Zones and
Clustering and
configuration
neighbors
peers
Overview
Call
Bandwidth
processing
control
248
TANDBERG
VIDEO COMMUNICATION SERVER
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
