TANDBERG D14049.04 Administrator's Manual page 273

Grey Headline (continued)
Command reference - xStatus
LDAP:
Status: <Inactive/Initializing/Active/Failed>
Cause: {Visible if status is Failed} <Failed to connect to LDAP server / The LDAP server does not support TLS. / Failed to establish a TLS connection to the LDAP server. Please check that the LDAP
server certificate is signed by a CA, and that CA is included on the CA certificate installed on the VCS. / Failed to authenticate with LDAP server / A valid CA certificate for the LDAP database has not
been uploaded; this is required for connections via TLS / No server address configured>
Address: <IPv4Addr/IPv6Addr>
Port: <1..65534>
Links:
Link [1..100]:
Name: <S: 1,50 Link name>
Bandwidth:
LocalUsage: <0..100000000>
ClusterUsage: <0..100000000>
Calls:
Call [0..900]: {0..900 entries}
CallSerialNumber: <S: 1,255>
Loggers
Logger [1..6]
Module:
TraceLevel:
NTP:
Status: <Inactive/Initializing/Active/Failed>
Cause: {Visible if status is Failed} <No response from NTP server/ DNS resolution failed>
Address: <IPv4Addr/IPv6Addr>
Port: <1..65534>
Last Update: <date-time>
Last Correction: <Time in seconds, precision in seconds>
Overview and System
Introduction
status configuration
D14049.07
March 2010
VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
273
TANDBERG VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices