Grey Headline (continued)
Status
The Event Log is a list of all the events that have occurred on the system since the last upgrade.
The Event Log holds 2GB of data; when this size is reached, the oldest entries are overwritten.
However only the first 50MB of event log data can be displayed through the web interface.
To view the Event Log page:
•
Status > Logs > Event Log
To view the Event Log using the CLI:
eventlog
•
Filtering the Event Log
Search for lets you filter the event log. Enter the words you want to search for and click Filter. Only
those events that contain all the words you entered are shown.
To do more advanced filtering, click more options. This gives you additional filtering methods:
Contains the string: only includes events containing the exact phrase entered here.
Contains any of the words: includes any events that contain at least one of the words entered
here.
Not containing any of the words: filters out any events containing any of the words entered here.
Note: use spaces to separate each word you want to filter by.
Click Filter to reapply any modified filter conditions. To return to the complete event log listing, click
Reset.
Reconfigure the log settings
Clicking this link takes you to the Logging configuration page. From this page, you can set the level
of events that are recorded in the Event Log, and also set up a remote server to which the Event
Log can be copied. See the sections on
more information.
Results
This section shows all the events, with the most recent being shown first.
Most tvcs events contain hyperlinks in one or more of the fields (such fields change color when
you hover over them). You can click on the hyperlink to show only those events that contain the
same text string.
For example, clicking on the text that appears after Event= will filter the list to show all the events
of that particular type. Likewise, clicking on a particular Call-Id will show just those events that
contain a reference to that particular call.
Overview and
System
Introduction
status
configuration
D14049.07
March 2010
Setting the Event Log level
and
About remote logging
VCS
Zones and
configuration
neighbors
Event Log
Event Log color coding
Certain events in the Event Log are color-coded so that you can identify them more easily. These
events are as follows:
Green
•
System Start
•
Installation of <item> succeeded
•
Registration Accepted
•
Call Connected
•
Request Successful
•
Beginning System Restore
•
Completed System Restore
Orange
•
System Shutdown
Red
•
Registration Rejected
•
Registration Refresh Rejected
•
Call Rejected
•
Security Alert
•
License Limit Reached
for
•
Decode Error
•
TLS Negotiation Error
•
External Server Communications Failure
•
Application Failed
•
Request Failed
•
System Backup Error
•
System Restore Error
•
Authorization Failure
Clustering and
Call
Bandwidth
peers
processing
control
31
TANDBERG
VIDEO COMMUNICATION SERVER
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices