Table of Contents
Advertisement
Grey Headline (continued)
Using the VCS
Page features and layout
These are the features that can be found on
some or all of the web interface pages.
Note that you cannot change configuration
settings if your admin account is read-only.
Information bar
The VCS provides you with feedback in
certain situations, for example when settings
have been saved or when you need to take
further action. This feedback is given in a
yellow information bar at the top of the page.
Sorting Columns
Click on column headings to sort the
information in ascending and descending order.
Select All and Unselect All
Use these buttons to select and unselect all
items in the list.
Status
On configuration pages, this section shows
you the current status of the items you are
configuring.
Note that some configuration changes require
a restart to take effect, so if you have changed
the configuration but not yet restarted this
shows the existing (unchanged) status.
System Information
The name of the user currently logged in, the
system name (or LAN 1 IPv4 address if no
system name is configured), local system time,
hardware serial number and VCS software
version are shown at the bottom of the page.
Overview and
System
Introduction
status
configuration
D14049.07
March 2010
Web interface
Page name and Location
Every page shows the page name and the
menu path to that page. Each part of the menu
path is a link; clicking on any of the higher level
menu items takes you to that page.
VCS
Zones and
Clustering and
configuration
neighbors
peers
System Warning
This icon appears on the top right
corner of every page when there is a system
warning in place. Click on this icon to go to the
Warnings page which gives information about
the warning and its suggested resolution.
Call
Bandwidth
processing
control
16
TANDBERG
VIDEO COMMUNICATION SERVER
Help
This icon appears on the top right corner
of every page. Clicking on this icon opens a
new browser window with help specific to the
page you are viewing. It gives an overview of
the purpose of the page, and introduces any
concepts configured from the page.
Log out
This icon appears on the top right corner
of every page. Clicking on this icon ends your
administrator session.
Manual
This icon appears on the top right corner
of every page. Clicking on this icon takes
you directly to the latest version of the VCS
Administrator Guide on the TANDBERG web
site.
Information box
An information box appears on the
configuration pages whenever you either click
on the Information icon or click inside a field.
This box gives you information about the
particular field, including where applicable the
valid ranges and default value.
To close the information box, click on the X at
its top right corner.
Information
This icon appears to the right of most
input fields in the web interface.
Clicking on this icon activates the Information
Box.
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
