Table of Contents
Advertisement
Shutdown and Restart
System Status
The LCD panel display indicates the current status of the
Content Server.
LCD panel display when a call is
currently in progress.
LCD panel display when no calls are
currently in progress.
LCD panel display when transcoding
is in progress.
In addition you will also find the currently installed version, as
can be seen from the below menu structure.
How to use the front panel keys is explained on the next
page.
For details on how to restart the TCS service without
restarting the Content Server, see the
Settings
section.
No Shutdown or Restart While Calls Are In Progress!
We do not recommend to shutdown or restart the
!
Content Server while calls are in progress. If the Content
Server is in a call and the server is restarted or shut
down, calls in progress will fail and will not be recorded.
Table of
Disclaimers,
Safety,
Contents
Patents etc.
Environmental
D13898.05
DECEMBER 2007
IP Settings are treated in Installation.
IP Settings
Commands
Version Info
Administrator
Display information on the
version currently installed.
Introduction
Installation
Quick Setup
Command Menu Structure
Restart?
No
Yes
Shutdown?
No
Yes
Full Restore?
No
Yes
- Restore Defaults -
Full Restore
Config Restore?
Config Restore
No
Yes
Restoring Default Settings
is described on the next
Backup and
Operation
Restoring
25
TANDBERG
Restarting the Content Server
1.
Press
Enter
to display the Main Menu
screen
2.
From the
Main Menu screen, use the
Up
or
Down
arrow to select Commands
3.
Press
Enter
to confirm your selection
4.
From the
Commands menu, use the
or
Down
arrow to select Restart and
press
Enter
You will be asked to confirm this
5.
action on the following screen. At the
Restart? prompt, use the
arrow to select Yes and press
confirm.
Shutting Down the Content Server
Press
Enter
to display the Main Menu
1.
screen
2.
From the
Main Menu screen, use the
Up
or Down arrow to select Commands
3.
Press Enter to confirm your selection
page.
4.
From the
Commands menu, use the
or
Down
arrow to select Shutdown and
press
Enter
5.
You will be asked to confirm this
action on the following screen. At the
Shutdown? prompt, use the
Down
arrow to select Yes and press
Enter
to confirm.
6.
IMPORTANT
—wait until is is safe to shut
down the Content Server and the LCD
panel displays Power off.
Administrator
Conference
View
Settings
Setup
Conferences
CONTENT SERVER
ADMINISTRATOR GUIDE
Up
Up
or
Down
Enter
to
Up
Up
or
Appendices
Advertisement
Table of Contents
