Table of Contents
Advertisement
Grey Headline (continued)
TANDBERG FindMe™ user guide
FindMe home page
This page summarizes your FindMe account.
It shows your configured devices and locations,
and your currently Active location.
From here you can change your Active location
or use the Add, Edit and Delete buttons to
modify your device and location details.
FindMe account details
The FindMe ID and external telephone number
of the account being configured.
My devices
A list of all the devices configured for your
FindMe account.
Click Edit next to the device whose details you
want to change, to open a new window where
you can modify the device name, address (alias
or number) or picture.
Click Delete to remove a device from the list.
Click Add new device to open a new window
where you can set up a new device. You can
add up to 15 devices.
When your account was set up, your
system administrator may have
configured one or more principal
devices. These are the main devices
associated with your account. You cannot
delete or change the address of your principal
devices; you can only change the device name
or picture. Contact your administrator if you
need to change your principal devices.
Overview and
System
Introduction
status
configuration
D14049.07
March 2010
Configuring your FindMe user account
Active location
Ensure that none of
the active location's
Shows the currently Active location. When someone calls your
primary devices are
FindMe ID the devices associated with your active location are
set to Autoanswer.
called.
If they are, the system will
To change your active location, click on the radio button next to
consider the call to have been
the required location name. One of your FindMe locations must
answered when Autoanswer
always be active.
is initiated, and so it will not
!
divert the call to any other
devices.
VCS
Zones and
Clustering and
configuration
neighbors
peers
If no devices or locations are configured, all calls to your
FindMe will be rejected.
Call
Bandwidth
processing
control
149
TANDBERG
VIDEO COMMUNICATION SERVER
Change Password
Click here to change the password used to
access your FindMe account (if your account
name and password are managed locally
within the VCS). This goes to a new page where
you can enter a new password. Note that
passwords are case sensitive.
Logout
Click here to exit the FindMe home page.
My locations
Lists the locations against which you can
associate different combinations of your
devices.
Forward calls to shows the primary devices
that are called when your FindMe ID is first
dialed (where that is the currently active
location). If more than one device is listed
here, they will all ring at the same time.
Divert when busy to shows the devices that
are called if the primary devices are busy.
Divert when not answered to shows the
devices that are called if the primary devices
are not answered after a specified time.
Click Edit next to the location whose details
you want to change, to open a new window
where you can select the primary devices
associated with that location and the devices
to divert to when the primary devices are busy
or not answered.
Click Delete to remove a location from the list.
Note that you cannot delete the active location.
Click Add new FindMe location to open a new
window where you can set up a new location
and its associated devices. You can add up to
10 locations.
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
