Local Zone; Zones - TANDBERG D14049.04 Administrator's Manual

Tandberg video communications server administrator guide
Table of Contents

Advertisement

Grey Headline (continued)
Status
The Local Zone status page lists all the subzones that together make up the Local Zone. This will
always include the Default Subzone and the Traversal Subzone, plus any other subzones that have
been configured.
To view the Local Zone page:
Status > Local Zone
Clicking on a subzone name will take you to the configuration page for that subzone
The page displays the following information:
Subzone name
The names of each subzone currently configured on this VCS.
Registrations
The number of devices currently registered within the subzone.
Note that devices cannot be registered to the Traversal Subzone.
Calls
The number of calls currently passing through the subzone.
Note that a single call may pass through more than one subzone, depending
on the route it takes. For example, traversal calls from a locally registered
endpoint will always pass through the Traversal Subzone, so they will
show up twice; once in the originating subzone and once in the Traversal
Subzone.
Bandwidth used
The total amount of bandwidth used by all calls passing through the
subzone.
Overview and
System
Introduction
status
configuration
D14049.07
March 2010

Local Zone

VCS
Zones and
configuration
neighbors
The Zone status page lists all the zones that are currently configured on your VCS, the number of
calls and amount of bandwidth being used by each, and their current status.
The list of zones always includes the Default Zone, plus any other zones that you have created.
To view the Zones page:
Status > Zones
Clicking on a zone name takes you to the configuration page for that zone.
Note that this does not apply to the Default Zone, as this is not configurable.
The page displays the following information:
Name
The names of each zone currently configured on this VCS.
Type
The type of zone.
See the
Calls
The number of calls currently passing out to or received in from each zone.
Bandwidth used
The total amount of bandwidth used by all calls passing out to or received in
from each zone.
Status
The current status of each zone.
Clustering and
Call
Bandwidth
peers
processing
control
26
TANDBERG
VIDEO COMMUNICATION SERVER

Zones

About zones
section for a full description of each zone type.
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices

Advertisement

Table of Contents
loading

Table of Contents