Table of Contents
Advertisement
Grey Headline (continued)
TMS Agent
TMS Agent is a process that runs on the VCS to manage FindMe and Device Provisioning data.
It acts on behalf of TMS so that TMS is not a single point of failure, and enables each VCS to
share the load. It supports the replication of FindMe and provisioning data, sharing the data
among cluster peers as well as the central TMS, providing resilience in case of connection failures
between any VCS and TMS.
TMS Agent is installed as part of the VCS Platform and requires no configuration on the VCS, other
than ensuring the default password is changed (see TMS Agent account passwords below).
•
You must use TMS to create and manage Device Provisioning data.
•
FindMe accounts may be set up using TMS or VCS.
FindMe™
The TMS Agent replicates changes to FindMe account information across peers in a VCS cluster
(FindMe account changes can be made on any peer, not just the master), across to TMS and also
across to other VCS clusters managed by the same TMS.
Note that the FindMe option key must be installed on the VCS.
Device Provisioning
The TMS Agent works with the TMS Provisioning Directory to replicate and distribute the
provisioning information and phonebook from TMS via VCSs to endpoint devices. VCSs cache and
replicate data among themselves in case connection to TMS is lost.
Note that the Device Provisioning option key must be installed on the VCS.
TMS Agent account passwords
TMS agent is accessed via two accounts: one for connecting via LDAP into the TMS Agent
database, and one for managing the replication of the TMS Agent database. These accounts are
only used by the internal processes running on the VCS and TMS. System administrators must not
use these accounts.
These accounts have a username of cn=Directory Manager and a default password of TANDBERG
(all upper case). Both passwords must be changed as soon as possible to maintain security of
the VCS data. Warnings are shown on the web UI and the CLI if either account has the default
password set.
•
If your VCS uses TMS as an external manager, you must use TMS to change the passwords on
these accounts. Instructions for this are in the
•
If your VCS is not managed by TMS, you have to change these passwords by logging into the VCS
as the root user. Instructions for this are contained in the online help; follow the link associated
with the VCS's TMS Agent password warning message. Note that if your VCS is subsequently
reconfigured to use TMS, the password must first be reset to the default value of TANDBERG.
Overview and
System
Introduction
status
configuration
D14049.07
March 2010
Clustering deployment guide
[27].
VCS
Zones and
Clustering and
configuration
neighbors
peers
Overview
Call
Bandwidth
processing
control
153
TANDBERG
VIDEO COMMUNICATION SERVER
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
