Enum Zone; Dns Zone; Default Zone - TANDBERG D14049.04 Administrator's Manual

Grey Headline (continued)
Zones

ENUM zone

ENUM zones allow you to locate endpoints via an ENUM lookup.
You can create one or more search rules for ENUM zones based
on the ENUM DNS suffix used and/or by pattern matching of the
endpoints' aliases.
After you have configured one or more ENUM zones, you can:
•
apply transforms to alias search requests directed to that
group of endpoints
•
control the bandwidth used for calls between your local VCS
and each group of ENUM endpoints
See the Configuring ENUM zones section for information on the
configuration options available.
See the ENUM dialing section for more information on
the use of ENUM zones.
Overview and System
Introduction
status configuration
D14049.07
March 2010
DNS zones allow you to locate endpoints via a DNS lookup. You
can create one or more search rules for DNS zones based on
pattern matching of the endpoints' aliases.
After you have configured one or more DNS zones, you can:
•
apply transforms to alias search requests directed to that
group of endpoints
•
control the bandwidth used for calls between your local VCS
and each group of DNS endpoints
See the Configuring DNS zones
configuration options available.
VCS Zones and Clustering and
configuration neighbors peers

DNS zone

section for information on the
Call Bandwidth
processing control
66
TANDBERG VIDEO COMMUNICATION SERVER

Default Zone

Any incoming calls from endpoints or other devices that are not
recognized as belonging to any of the existing configured zones
are deemed to be coming from the Default Zone.
The VCS comes pre-configured with the Default Zone and default
links between it and both the Default Subzone and the Traversal
Subzone.
The purpose of the Default Zone is to manage incoming calls
from unrecognized endpoints to the VCS. You can do this by:
•
deleting the default links; this prevents any incoming calls
from unrecognized endpoints
•
applying pipes to the default links; this lets you control the
bandwidth consumed by incoming calls from unrecognized
endpoints
The Default Zone has no configuration options.
The default links can be reinstated at any time by using
the command:
xCommand DefaultLinksAdd
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices