Grey Headline (continued)
Configuring the VCS as a traversal client
To enable your VCS to act as a traversal client on behalf of its endpoints and neighbor gatekeepers,
you must create a connection between it and a traversal server (e.g. a TANDBERG VCS Expressway
or Border Controller).
You do this by adding a new traversal client zone on the VCS client and configuring it with the details
of the traversal server.
To add a new traversal client zone:
•
VCS configuration > Zones.
You are taken to the Zones page.
Click New.
You are taken to the Create zone page.
xCommand ZoneAdd
•
To edit an existing traversal client zone:
•
VCS configuration > Zones.
You are taken to the Zones page.
Click on the name of the zone you want to configure.
You are taken to the Edit zone page.
xConfiguration Zones Zone [1..1000]
•
xConfiguration Zones Zone [1..1000] Traversal Client
•
For details on the configuration options available for traversal client zones, see the
traversal client zones
section.
You can create more than one traversal client zone if you want to connect to multiple
traversal servers.
Overview and
System
Introduction
status
configuration
D14049.07
March 2010
Adding and configuring a traversal client zone
Configuring
VCS
Zones and
Clustering and
configuration
neighbors
peers
Call
Bandwidth
processing
control
135
TANDBERG
VIDEO COMMUNICATION SERVER
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices