Numerical Keypad Features; What Happens When You Press A Key On The Numerical Keypad; Using The Number Key Settings; Touch Tones - TANDBERG 1700 MXP User Manual

Getting Acquainted with the System

Numerical Keypad Features

What Happens When You Press a Key on the Numerical Keypad?

That depends on the context. The following guidelines apply:
•
Pressing a Numerical key when outside a call will produce the Call menu.
•
Once positioned inside an entry field requiring alphanumeric entries, the
system automatically goes to ABC mode. Entering letters is similar to a
cellular phone – see right.
•
Once positioned inside an entry field requiring numerical entries, the sys-
tem automatically switches to 123 mode allowing numbers to be dialled
with the Numerical keys as usual.

Using the Number Key Settings

When Number Key Settings is set to Manual (Control Panel > Menu Settings) a
menu will be displayed once you press a numerical key inside a call.
•
Select Add another
Call to add participants
•
Select Dial Extension Number to dial
touch tones
•
Select Use Presets to have the system
interpret the number as camera preset
addressing.
If you are a power user, you may not want this menu to appear. It may
therefore be set to your preferred setting
Settings.
Observe that the Control Panel may have been password protected by your
adminstrator.

Touch Tones

To activate dialling touch tones during a call, press the Touch
indicator will let you know that Touch tones are enabled. Finish with OK to exit
Touch tone mode.
D 13954.01
JUNE 2006
in the Control Panel > Menu
tones button. An

Using the Numerical Keypad in Alphanumerical Mode

Whenever alphanumerical entries are expected by the system,
a small appears in the right lower corner of the entry field.
abc
In this mode, entries from the Numerical
interpreted as alphanumeric entries in the same way as on a cellular
phone.
Guidelines:
•
Press the key that corresponds to the required letter.
•
Press the key as many times as needed to access the
correct letter.
•
Change to lower or back to upper case letters with the
and space with the 0 _ key.
•
To write numbers in a text input field, repeatedly press the
corresponding key a number of times until the digit appears.
Example: How do I write System 123 in the System
input field (in General in Administrator
Settings)?
Do as follows:
Press the 7-key four times to get an S.
1.
2. Press the #-key once to switch between
upper case and lower case letters.
3. Press the -key three times to get a y.
. Press the 7-key four times to get an s.
5. Press the 8-key once to get a t.
. Press the 3-key twice to get an e.
7. Press the -key once to get an m.
8. Press the 0-key once to get space.
. Press the 1-key three times to get a 1.
10. Press the 2-key four times to get a 2.
11. Press the 3-key four times to get a 3.
22
keypad are automatically
#
a/A key,
Name
Snapshot Snapshot
TANDBERG 1700 MXP
USER GUIDE
Presets Presets
Touch tones Touch tones