Table of Contents
Advertisement
Control Panel > Presentation Settings
VNC Settings
CANCEL
Select this icon and press OK
to leave the menu undoing any
changes.
RESTORE DEFAULTS
Select this icon and press OK
to restore the default settings.
SAVE
Select this icon and press
OK to leave the menu putting
changes into effect.
D 13954.01
MAY 2006
Camera Presets
Snapshot
Touch tones
83
TANDBERG 1700
USER GUIDE
VNC SETTINGS
VNC Settings is necessary when using a
VNC presentation. See PC Soft Presenter
and VNC for more information on how to
use VNC.
ADDRESS
The IP-address of the PC with the VNC
software installed. To find the IP-address
of the PC, place the mouse pointer on
the VNC program icon in the lower right
corner of the Windows taskbar. You can
also select Command
Prompt from the
Startup-menu > Run and type cmd then
ENTER. This will open a command window
and from here type ipconfig and press
ENTER.
DISPLAY NUMBER
The display number for VNC is 0 and
upwards. If you are using WinVNC, double-
click on the icon on the taskbar to view
WinVNC properties. This number should
correspond with Display Number in this
menu.
PASSWORD
Enter the same password as specified in
WinVNC properties. The password will be
shown as asterisk signs (*) the next time
you enter the menu.
MXP
Advertisement
Table of Contents
