Table of Contents
Advertisement
Video Meeting Features
Far End Camera Control – Pan, Tilt and Zoom
About Far End Camera Control
This is a feature that lets you pan, tilt,
and zoom the far end camera. If far end
presets* are available you may access
these as well, and you may also make use
of any video sources that the far end may
have at its disposal.
This feature requires a movable camera in
the far end – i.e. communication between
two 1700 MXP units will not provide far
end camera control.
This feature is not accessible in MultiSite
video meetings.
* Far End Presets are described on the following page.
D 13954.01
JUNE 2006
During a video meeting, press OK to produce the menu and
navigate to the Camera
Control icon.
Navigate to the Camera
Control icon.
Use the Arrow keys to pan and tilt the far end camera and Zoom + and Zoom
Press OK to exit this mode and navigate to the Back icon and click OK to exit the Camera
Panning, Tilting, and Zooming the Far End Camera
– to zoom in and out.
3
Press OK to display the menu and navigate to the Far
Press OK to enable Far End Camera
Control. Observe the four
triangles indicating your control options.
Control mode as such.
TANDBERG 1700
MXP
USER GUIDE
End tab.
Advertisement
Table of Contents
