Table of Contents
Advertisement
Control Panel > Network Settings > LAN Settings
SNMP Settings
Camera Presets
Snapshot
Touch tones
D 13954.01
MAY 2006
Camera Presets
Snapshot
Touch tones
CANCEL
Select this icon and press OK
to leave the menu undoing any
changes.
RESTORE DEFAULTS
Select this icon and press OK
to restore the default settings.
SAVE
Select this icon and press
OK to leave the menu putting
changes into effect.
11
TANDBERG 1700
USER GUIDE
SNMP TRAP
HOST
Identifies the IP-address of the SNMP manager.
SNMP (Simple Network Management Protocol,
SNMP Ver 1) is used to monitor and configure
different entities in a network. The system's
SNMP Agent responds to requests from SNMP
Managers (a PC program etc.). SNMP traps are
generated by the agent to inform the manager
about important events.
Traps can be sent to multiple SNMP Trap Hosts.
Enter the IP address of up to three SNMP man-
agers. All traps will then be sent to the hosts
listed.
SNMP COMMUNITY
Used to authenticate SNMP requests. SNMP
requests must have a 'password' in order to
receive a response from the SNMP agent in the
codec.
Note! The SNMP Community name is
case sensitive. The default password is
public
MXP
Advertisement
Table of Contents
