Table of Contents
Advertisement
Control Panel
Diagnostics – an Overview
GETTING TO THIS MENU
GETTING TO THIS MENU
Press OK
to produce the below menu.
Use the Arrow
keys to move to the
Control
Panel.and press OK.
The Control Panel will now be displayed
Use the Arrow
keys to navigate to
Diagnostics.
LOST IN
TRANSLATION? Click on the Phone
Book icon 5 times followed by pressing
the number key 1 on the remote control to
reset the menu language to English.
D 13954.01
MAY 2006
The Diagnostics allows testing of
individual system components
and displays the current system
settings.
133
TANDBERG 1700
USER GUIDE
SYSTEM INFORMATION
Select System Information to view system
numbers, line status, software version,
hardware serial number and other useful
information. Press arrow key up and down
to scroll in the System Information list.
CALL STATUS
Comprehensive information about the
call is available through the Call
Status
window. The menu has two columns, one
for transmitted and one for received audio/
video/data information. If Dual
Stream or
MultiSite is available on your system and
in use, pressing the Vertical
Arrow keys will
show one page per connected site.
DETAILED CALL STATUS
Provides more detailed information on
packet loss and jitter.
SYSTEM SELFTEST
The system performs a check to determine
internal hardware integrity. System Selftest
is useful when you want to check if your
network connection is active.
VIEW ADMINSTRATOR SETTINGS
This window displays all the system set-
tings. Use the Arrow keys on the remote
control to scroll through the list.
IP ADDRESS CONFLICT CHECK
The system will give a warning if there is an
IP conflict. You may initiate this check by
selecting IP Address Conflict
Check.
WARNINGS
Any warnings registered by the system will
be displayed in the Warnings menu. Open a
warning in the list to get more information
about the warning.
MXP
Advertisement
Table of Contents
