Installation; Fireplace Specifications; Into A Masonry Fireplace - Pacific energy Alderlea T5 LE Insert Installation And Operating Instructions Manual

Your Insert is designed to be installed into a masonry or factory-built, zero-clearance wood burning fireplace.
The masonry fireplace must be built according to the requirements of the Standard of Chimneys, Fireplaces,
Vents and Solid Fuel Burning appliances, N.F.P.A. 211 (Latest Edition) or applicable National, Provincial, State
or local codes. The installation shall conform to CAN/CSA-B365, Installation Code for Solid-Fuel-Burning
Appliances and Equipment. The factory-built, zero-clearance fireplace and its chimney must be listed per UL
127 or ULC S610 standards.
Warning: Under no circumstances is this heater to be installed in a makeshift or "temporary" manner.
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVICING ANOTHER APPLIANCE.

Fireplace Specifications

See page 12 for the fireplace minimum sizes:
Chimney height (from hearth)
• The Fireplace and Chimney system must be suitable for wood burning use. Check for creosote build up
or other obstructions. Have the chimney swept and Inspected. Inspect your fireplace for cracks, loose
mortar or other physical defects. If repairs are required, they should be completed before installing your
insert.
The Insert must be installed in accordance with Local and or National Building Codes.
We recommend that our products be installed and/or serviced by professionals who are certified by a
"Qualified agency";
NFI (National Fireplace Institute®) in the United States,
CSIA (Chimney Safety Institute of America) in the United States and Canada,
WETT (Wood Energy Technology Transfer) in Canada or
APC (Association des Professionnels du Chauffage) in Quebec
Caution:
• The fireplace insert is heavy and should be installed by two people.
• Place cardboard or heavy blanket on the hearth to prevent bamage while installing.

Into a Masonry Fireplace

The existing fireplace damper is to be locked open or removed completely.
WARNING: Do not remove bricks or mortar from your existing fireplace.
• Exception: Masonry or steel, including the damper plate, may be removed from the smoke shelf and
adjacent damper frame if necessary to accommodate a chimney liner, provided that their removal will
not weaken the structure of the fireplace and chimney, and will not reduce protection for combustible
materials to less than that required by the National Building Code.
A metal tag is provided and is to be fastened to the back wall of the fireplace, if the fireplace has been
modified to accommodate the insert.
ALT5 LE Insert 230819-32

Installation

15' (minimum).
15
100003038