Fan Removal/Installation - Pacific energy Alderlea T5 LE Insert Installation And Operating Instructions Manual

Fan Removal/Installation

1. Remove Decorative Top and both Fan shields as specified in"Fan Speed Controller Relocation" on page
22
2. Disconnect fan wires as shown in Figure 32 from appropriate fan that is being replaced. Remove Thermal
switch if needed (Figure 33).
3. Remove the two screws securing the fan bracket to the stove using a 7/16" socket or wrench. Reverse
steps 1&2 to install new fan (Figure 33).
Figure 32: Disconnect the fan wires.
ALT5 LE Insert 230819-32
Bolts
Figure 33: Remove thermal switch.
25
Thermal
switch
100003038