Clearances; Minimum Clearances To Combustibles - Pacific energy Alderlea T5 LE Insert Installation And Operating Instructions Manual

The minimum required clearances to surrounding combustible materials when installed into a masonry or
factory built fireplace are listed below and in Figure 5.
254mm
l l
W a
e n t
j a c
A d
Figure 5: Clearances - ALT 5 Insert LE.

Minimum Clearances to Combustibles:

Side of Blower Cover to Adjacent Sidewall ............................ .......10 in. (245 mm.)
Side of Blower Cover to Side Facing (max 3-1/2 in. deep) ............... 6 in. (155 mm.)
Top of Cast top to Mantel Facing .................................................... 12 in. (305 mm.)
Top of Cast Top to Mantel (max 12in. deep) .................................... 12 in.( 305 mm.)
CAUTION: Unit hot while in operation. Parts of the appliance, especially the external surfaces,
will be hot to touch when in operation. Keep children, clothing and furniture away.
Contact may cause skin burns.
100003038

Clearances

10"
Mantel or Top Facing
12"
305mm
Fireplace hearth
14
6"
155mm
ALT5 LE Insert 230819-32