Pacific energy ALDERLEA T6 Installation & Operation Manual
  1. Manuals
  2. Brands
  3. Pacific energy Manuals
  4. Wood stove
  5. ALDERLEA T6
  6. Installation & operation manual

Pacific energy ALDERLEA T6 Installation & Operation Manual

Hide thumbs Also See for ALDERLEA T6:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION & OPERATION GUIDE
ALDERLEA T6 CAST IRON WOOD STOVE
If this stove is not properly installed, a house fire may result. For your safety,
follow the installation instructions. Contact local building or fire officials about
restrictions and installation inspection requirements in your area.
©PACIFIC ENERGY FIREPLACE
190617-24
PRODUCTS LTD. - 2017
MODEL: ALDERLEA T6
(STANDARD OR CLEARVIEW DOOR)
SERIES: B
SAFETY NOTICE
PLEASE SAVE THESE INSTRUCTIONS
TESTED and LISTED to
CAN/ULC S627 AND UL 1482
Meets the Environmental Protection Agency's
May 2015 Particulate Emission Standards
AL6B
By Pacific Energy
SERIAL #
5055.3272

Advertisement

Table of Contents
loading

Related Manuals for Pacific energy ALDERLEA T6

Summary of Contents for Pacific energy ALDERLEA T6

  • Page 1 By Pacific Energy INSTALLATION & OPERATION GUIDE SERIAL # ALDERLEA T6 CAST IRON WOOD STOVE MODEL: ALDERLEA T6 (STANDARD OR CLEARVIEW DOOR) SERIES: B SAFETY NOTICE If this stove is not properly installed, a house fire may result. For your safety, follow the installation instructions.

  • Page 2: Table Of Contents

    Contact local building or fire officials about restrictions and installation inspection requirements in you area. Please read this entire manual before you install and use your new room heater. Failure to follow instructions may result in property damage, bodily injury, or even death. ©PACIFIC ENERGY FIREPLACE 190617-24 AL6B PRODUCTS LTD.

  • Page 3: Safety And Maintenance

    WARNING: Only use materials and components sup- 4. DOOR GASKETS - The gasket used by Pacific Energy (5/16"(8mm) medium density plied or specified by manufacturer when fiberglass rope) requires only light pressure to seal. This will prolong seal life. It is doing maintenence or replacements.

  • Page 4: Maintenance Checks

    - Please contact your Dealer if you experience any of the damage listed above. Continuing to operate your stove with broken parts may accelerate damage to other parts and may void your warranty ©PACIFIC ENERGY FIREPLACE 190617-24 AL6B PRODUCTS LTD.

  • Page 5: Chimney Smoke And Creosote Formation

    (salt from beach wood will corrode your fireplace and void your warranty). Do not leave the air inlet wide-open for extended periods of time. Keep a fire extinguisher handy. Prepare a home evacuation plan with a place outside where everyone is to meet. 190617-24 AL6B ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 6: Appliance Dimensions

    216mm 4 1/8"(105mm) OUTSIDE AIR INLET 2 5/16" 59mm 28 3/8” 29 13/16” 721mm 757mm Outside Air Opening Dimensions Fig #1a 4 1/8"(105mm) * CENTERLINE OF CHIMNEY OUTSIDE AIR INLET OUTLET 3/8" (10mm) ©PACIFIC ENERGY FIREPLACE 190617-24 AL6B PRODUCTS LTD.

  • Page 7: Installation - Residential

    330mm 508mm 413mm 356mm 381mm 16" 406mm DOUBLE WALL 16" CONNECTOR 4" 5” 26" 406mm 27.75” 127mm 102mm 705mm 30.75” 28" 660mm 781mm 711mm ALCOVE: Min. Height 7 feet(2.1m) Max. Depth 4 feet(1.2m) 190617-24 AL6B ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 8: Chimney And Connector - Residential

    Use holes provided in collar to secure pipe with three screws. 5. Install the remaining lengths of pipe, one on top of the other, to the finished height of the chimney connector and secure to each other. ©PACIFIC ENERGY FIREPLACE 190617-24 AL6B PRODUCTS LTD.

  • Page 9: Installation - Mobile Home

    Consult your chimney supplier for installation advice. Fig #3 Minimum Clearances to Combustibles – Mobile Home DOUBLE WALL CONNECTOR 10" 254mm 8" 22.25" 18.75" 203mm 565mm 18" 476mm 457mm 8" 32.75" 203mm 832mm 190617-24 AL6B ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
  • Page 10 HOODED VENT OR 90º ELBOW TURNED DOWN * 4"(100mm) diameter air inlet with rodent screen * If the crawl space is well ventilated it is not nec- essary to extend air inlet to outside ©PACIFIC ENERGY FIREPLACE 190617-24 AL6B PRODUCTS LTD.

  • Page 11: Installation Procedure - Mobile Home

    6. To attach stove to floor, first remove the leveling bolts from the legs. Then attach stove to flooring using two 1/4" x 2" or longer lag screws through the leveling bolt holes. 190617-24 AL6B ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 12: Floor Protector

    During extremely cold weather, and especially when burning at very slow rates, the upper parts of the exposed chimney may ice up, partially blocking the flue gases. If blockage occurs, flue gases may enter living space. ©PACIFIC ENERGY FIREPLACE 190617-24 AL6B PRODUCTS LTD.

  • Page 13: Operation

    Hot while in operation. Keep children, clothing and furniture away. Contact may cause skin burns. Your PACIFIC ENERGY heater is designed for maximum overall efficiency at a moderate firing rate. Overfiring is hazardous and a waste of fuel. Too slow a burn contributes to creosote buildup and lowers combustion efficiency.
  • Page 14 Any tampering will void warranty and could be very hazardous. WARNING: Do not use grates or andirons to elevate the fuel. Burn directly on the fire bricks. Replace broken or missing bricks. Failure to do so may create a hazardous condition. ©PACIFIC ENERGY FIREPLACE 190617-24 AL6B PRODUCTS LTD.

  • Page 15: Restarting After Extended Or Overnight Burns

    Ensure ash dump door is properly engaged. Fill the cavity with the remaining ash level with of ash when cleaning. the firebox floor. Pull out ashpan and discard ashes into metal container. Replace ashpan and ensure it is seated properly. 190617-24 AL6B ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 16: Baffle Removal

    Inspect gasket between baffle and supply tube. If necessary, replace with gasket #3139.5 available from your Pacific Energy dealer. Re-install baffle assembly in reverse order. The two side pieces of insulation must be tight against the siderails.

  • Page 17: Troubleshooting

    1. Combustion air supply blocked • Check outside air supply for obstruction 2. Draft too low • Chimney plugged or restricted, - inspect and clean • Chimney oversized or otherwise unsuitable, -consult Dealer 190617-24 AL6B ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 18: Replacement Parts

    #9 LEG CASTING ASSY(4) ....ALDR.4807MBK #10 BOOST MANIFOLD ........3105.111 RIGHT AND LEFT ARE DETERMINED WHEN FACING THE FRONT OF THE STOVE ALL OTHER PARTS NOT INCLUDED IN ABOVE KITS ARE NOT SOLD SEPARATELY ©PACIFIC ENERGY FIREPLACE 190617-24 AL6B PRODUCTS LTD.

  • Page 19: Firebrick Installation Instructions

    9” X 4 1/2” X 1 1/4” (230 mm x 115 mm (cut) x 32 mm) 9” X 4 1/2” X ANGLED CUT (102 mm x 115 mm x 32 mm) 9” X 3 1/2” X 1 1/4” 190617-24 AL6B ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 20: Warranty Information

    3 Year Comprehensive Pacific Energy will replace or repair any part found to be defective (parts and labor) for three years from the date of pur- chase. This coverage includes electrical components (blowers, speed controls and thermal switches).
  • Page 21 190617-24 AL6B ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
  • Page 22 ©PACIFIC ENERGY FIREPLACE 190617-24 AL6B PRODUCTS LTD.

  • Page 23: Label

    Label REAR VIEW LABEL LOCATION MUR COTE MUR ADJACENT SIDE WALL ADJACENT WALL COTE SIDE 190617-24 AL6B ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
  • Page 24 By Pacific Energy PACIFIC ENERGY FIREPLACE PRODUCTS LTD. 2975 Allenby Rd., Duncan, B.C. V9L 6V8 For technical support, please contact your retailer. Web site: http://www.pacificenergy.net PRINTED IN CANADA ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

Table of Contents