Using An Suv Cable To Access Usb Drives In A Kvm Setup; Memory Options; Dimm Population Information; Installing A Dimm - HPE AR44z User Manual

Using an SUV cable to access USB drives in a KVM setup

The USB connectors on the SUV cable do not support USB devices that require a power source greater
than 500 mA at 5 V. When accessing this type of USB drives, such as a USB key or a USB optical drive,
use a USB hub in a KVM setup.
Procedure
1. Connect the SUV cable to the SUV port.
2. Connect a monitor to the video connector.
3. Connect a USB hub to the USB connector.
4. Connect a USB mouse to the USB hub.
5. Connect a USB keyboard to the USB hub.
6. Connect a USB key or a USB optical drive to the USB hub.

Memory options

DIMM population information

For specific DIMM population information, see the DIMM population guidelines on the Hewlett Packard
Enterprise website (http://www.hpe.com/docs/arm-population-rules).

Installing a DIMM

Prerequisites
• Note the following regarding the server memory support:
◦ A dual-processor server configuration requires the installation of at least two DIMMs.
◦ This server does not support the earlier DDR3 memory generation.
• If you are installing a processor 1(B) DIMM and an OCP network adapter is installed, make sure that
you have a T-15 Torx screwdriver available.
Hardware options installation 27