Britax Safe-n-sound BS8100A-020133 Series Instructions For Installation & Use page 55

USINGTHECHILDHARNESS
Connect the Harness to the VERSATETHER™ Catch on the booster seat detailed on page 45 to 46.
A. With the child seated, place the Child Harness straps over each shoulder.
B. Feed the right hand strap (loop end) into the cross strap loop to connect the two sides.
C. Feed the adult belt (lap belt or converted lap/sash) through the harness strap loops, ensuring that the
cross strap loop does not disconnect. Ensure there are no twists in the Child Harness, cross strap and
seatbelt.
1. Vehicle Upper Anchorage Fitting
2. VERSATETHER™ Catch on Booster Seat
3. Child Harness Attachment Clip
4. Right Hand Harness Strap
5. Adjuster (under cover)
6. Harness Strap Loop
7. Cross Strap Loop
8. Cross Strap
HOWTOINSTALLCHILDHARNESS
5
6
Instructions for Installation & Use - Series No. BS8100A-020133
Pull to remove
4
slack
8
7
6
1
2
3
55