Britax Safe-n-sound BS8100A-020133 Series Instructions For Installation & Use page 25

G. Pull the top tether adjustment strap (C) to remove all slack
but do not tighten.
Always secure the loose end of the top tether strap to
prevent it hanging out of the car or being accessible to the
child. Fold up excess strap and use pocket to store excess
strap behind seat.
EXPLANATION NOTE: This method of installation ensures
good seatbelt tension, even with the child in the seat. We
recommend that as your child grows, you should periodically
check the seatbelt and top tether tension to ensure that (a)
the car seatbelt has not slackened off and the top tether
strap is too tight.
IMPORTANT:
Always ensure that the car seatbelt is firmly restraining the child restraint on the vehicle seat and
ensure the slack is removed from the tether strap.
Always secure the loose end of the top tether strap to prevent it hanging out of the car or being
accessible by the child. Do not use the child restraint where this strap may fall into a split in the
seatback or off the side of the seat.
Make sure cup holders (if fitted) do not interfere with closure of the car door.
ALWAYS attach top tether hook and remove slack.
Instructions for Installation & Use - Series No. BS8100A-020133
HOWTOINSTALL
Pull Adjustment Strap
to remove slack
Roll up excess
strap and store
in the pocket
attached to the
cover.
A
C
25