Britax Safe-n-sound BS8100A-020133 Series Instructions For Installation & Use page 13

IMPORTANT:
• Regularly check the restraint components, straps and other fitments for correct function and condition.
Seek prompt repair.
• IF AN AIRBAG IS FITTED IN THE SEATING POSITION WHERE THE CHILD RESTRAINT IS TO BE
FITTED, FOLLOW THE VEHICLE MANUFACTURERS WARNINGS AND INSTRUCTIONS.
• Protect all webbing from abrasion and cutting by sharp corners and edges.
• This restraint must be used in conjunction with a lap-sash seatbelt or lap seatbelt and a Child Harness
in booster mode.
• The restraint should not be purchased or sold as a second hand item. It is recommended not to use
child restraints older than 10 years as the protection in an accident may be reduced.
• THIS RESTRAINT IS NOT SUITABLE FOR USE WHERE THE TOP TETHER STRAP MAY FALL INTO
A SPLIT IN THE SEAT BACK OR OFF THE SIDE OF THE SEAT.
• Seatbelt extenders are not recommended to be used if the seatbelt is not long enough to secure the
child restraint. If seatbelts are too short then seek advice from a child restraint fitter and consider their
recommendations before using a seatbelt extender. If you use a seatbelt extender then ensure that the
seatbelt buckle does not contact the child.
• This restraint is fitted with a harness system that does not need to be removed to adjust the harness or
remove the cover. Only disconnect when changing modes from toddler to booster. Follow instructions
herein.
• Do not store in areas that may get hot, like in car boots, roof space, beside shed walls which get hot in
summer. Do not place heavy items on top of the seat as this may distort the plastic
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.
:
Instructions for Installation & Use - Series No. BS8100A-020133
13