Britax Safe-n-sound BS8100A-020133 Series Instructions For Installation & Use page 58

HOWTOINSTALLCHILDHARNESS
RESTORINGTHERESTRAINT
RESTORINGTHERESTRAINTFORTODDLERUSE
A. Completely remove the child harness and gated slide
(if used) from the car seat. Remove the adjustable
extension strap (if used) from the VERSATETHER™
catch. Store the SecureGuard™ Device in the
seatbase location provided. Store the child harness
product in a cool, dry place until next required.
B. Remove the built-in harness from the storage recess
under the cover. Feed crotch strap and shoulder
straps through seat cover and shoulder strap slots in
the seatback.
C. Engage harness tongues into buckle. Ensure there
are no twists in the straps.
D. Attach to metal strap connector as shown right.
NOTE: When child harness is no longer being used,
disconnect the gated slide so that the seatbelt can be
correctly used as a lap-sash seatbelt by other users.
58
Instructions for Installation & Use - Series No. BS8100A-020133
Strap Connector
D