Britax Safe-n-sound BS8100A-020133 Series Instructions For Installation & Use page 23

C. Position restraint centrally to the chosen vehicle seat
position in forward facing mode.
Some vehicle seat fabrics (particularly velours) may
be damaged by a child restraint used continuously. We
recommend the use of the Britax Safe-n-Sound™ Messy
Mat or other protection under and behind the seat to keep
the vehicle seat in good condition.
Pull the centre panel flap down and gently lift headrest trim
end.
Fully lengthen seatbelt and feed the seatbelt through the
closest seatbelt path slot and pass across the seating
surface through the opposite slot. Follow the yellow belt
FORWARD-FACINGBELTPATH
path label -
and engage the seatbelt tongue into the buckle and remove
all slack.
Engage into
vehicle seatbelt
buckle
Instructions for Installation & Use - Series No. BS8100A-020133
HOWTOINSTALL
Headrest
trim end
Centre panel flap
Vehicle seatbelt
Yellow Belt Path label
FORWARD-FACINGBELT
PATH
Seatbelt feeds through slot in seat
between trim and seat back.
Car's seatbelt
23