Image Decoding Timeout - Newland NLS-NVH300 Series User Manual

Image Decoding Timeout

Image Decoding Timeout specifies the maximum time the scanner will spend decoding an image. This parameter is
programmable in 1ms increments from 1ms to 3,000ms. The default timeout is 350ms.
Set the image decoding timeout to 800ms:
1. Scan the Image Decoding Timeout barcode.
2. Scan the numeric barcodes "8", "0" and "0" from the "Digit Barcodes" section in Appendix.
3. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
37
@DETSET
Image Decoding Timeout