Using Rs-232 Cable; Using Ps/2 Cable - Newland NLS-NVH300 Series User Manual

Using RS-232 Cable

Connect the scanner to a host device through a RS-232 cable with RJ45 and RS-232 connectors and a power jack:
1. Plug the RJ45 connector into the data port on the scanner.
2. Plug the RS-232 connector into the RS-232 port on the host device.
3. Plug the supplied power adapter into the power jack on the RS-232 cable.

Using PS/2 Cable

Connect the scanner to a host device through a PS/2 cable with RJ45 and PS/2 connectors:
10