Timeout between Decodes
After a decode session ends, the engine waits for the timeout between decodes to expire before
beginning to monitor ambient illumination. This parameter is programmable in 0.1s increments from 0.1s
to 25.5s. The default timeout is 1.0s. To learn how to program this parameter, see Appendix E:
Parameter Programming Examples.
Timeout between Decodes
Image Stabilization Timeout
This parameter defines the amount of time that the engine waits for the image to stabilize to a point that it
can be decoded with more accuracy. It is programmable in 0.1s increments from 0.1s to 25.5s. The
default timeout is 0.4s. To learn how to program this parameter, see Appendix E: Parameter
Programming Examples.
Image Stabilization Timeout
47