Programming Barcode/ Programming Command/Function - Newland NLS-NVH300 Series User Manual

Programming Barcode/ Programming Command/Function

The figure above is an example that shows you the programming barcode and command for the Level Mode function:
1. The Level Mode barcode.
2. The Level Mode command.
3. The description of feature/option.
4. ** indicates factory default settings.
Note: "@" included in the programming command indicates permanent setting which means the setting will not be lost by
removing power from the scanner or turning off or rebooting it; whereas "#" included in the programming command indicates
temporary setting which means the setting will be lost by removing power from the scanner or turning off or rebooting it.
17