EAN-8
Restore Factory Defaults
Enable/Disable EAN-8
@EA8ENA1
** Enable EAN-8
If the scanner fails to identify EAN-8 barcodes, you may first try this solution by scanning the Enter
Setup barcode and then Enable EAN-8 barcode.
Transmit Check Character
EAN-8 is 8 digits in length with the last one as its check character used to verify the integrity of the data.
@EA8CHK2
** Transmit EAN-8 Check Character
@EA8DEF
Restore the Factory Defaults of EAN-8
@EA8ENA0
Disable EAN-8
86