Programming Barcode/Command/Function
The figure above is an example that shows you the programming barcode and command for the Exit Setup function:
1. The Exit Setup barcode
2. The Exit Setup command
3. The function/feature that can be enabled by using the programming barcode or command listed above.
4. ** indicates factory default settings.
Use of Programming Barcodes
Scanning the Enter Setup barcode can enable the scanner to enter the setup mode. Then you can scan a number of
programming barcodes to configure your scanner. To exit the setup mode, scan the Exit Setup barcode.
Some functions or options may involve parameter value settings that require scanning numeric barcodes. To find the
numeric barcodes, see the "Digit Barcodes" section in Appendix.
**【Exit Setup】
13
【Enter Setup】
【Enter Setup】
**【Exit Setup】