Programming Barcode/Command/Function; Use Of Programming Barcodes - Newland NLS-HR200C User Manual

Programming Barcode/Command/Function

The figure above is an example that shows you the programming barcode and command for the Exit
Setup function:
1. The Exit Setup barcode
2. The Exit Setup command
3. The function/feature that can be enabled by using the programming barcode or command listed
above.
4. ** indicates factory default setting.

Use of Programming Barcodes

Scanning the Enter Setup barcode can enable the scanner to enter the setup mode. Then you can scan
a number of programming barcodes to configure your scanner. To exit the setup mode, scan the Exit
Setup barcode.
If the scanner has exited the setup mode, only some special programming barcodes, such as the Enter
Setup barcode and Restore All Factory Defaults barcode, can be read.
**【Exit Setup】
25
【Enter Setup】
【Enter Setup】
**【Exit Setup】