Using Usb Cable; Using Rs-232 Cable - Newland NLS-HR22 User Manual

Using USB Cable

Connect the scanner to a Host through a USB cable with RJ45 and USB connectors:
1. Plug the RJ45 connector into the data port on the scanner.
2. Plug the USB connector into the USB port on the Host.

Using RS-232 Cable

Connect the scanner to a Host through an RS-232 cable with RJ45, RS-232 and power connectors:
1. Plug the RJ45 connector into the data port on the scanner.
2. Plug the RS-232 connector into the RS-232 port on the Host.
3. Connect the supplied power adaptor to the power connector of the RS-232 cable.
5
Enter Setup
** Exit Setup