Using Rs-232 Cable; Charging The Scanner Battery - Newland NLS-HR1580-BT User Manual

Using RS-232 Cable

Connect the cradle to a Host using an RS-232 cable with RJ45 and RS-232 connectors:
1. Plug the RJ45 connector of the cable into the data port on the cradle.
2. Plug the RS-232 connector of the cable into the RS-232 port on the Host.
3. Plug the supplied power adapter into the power jack on the cradle.

Charging the Scanner Battery

To charge the scanner battery, insert the scanner in a powered cradle. You can check the charge status with the red and
green LEDs on the cradle.
Red LED steady on
Red LED flashes
Green LED flashes
Green LED steady on
9
No scanner placed on cradle
Charging in progress, low battery level
Charging in progress, medium battery level
Fully charged