User Settings - Eaton 9355 Series User Manual

Display Functions
Display Functions
Operation
As the default or after 15 minutes of inactivity, the LCD displays the
As the default or after 15 minutes of inactivity, the LCD displays the
selectable startup screen. The default is the Eaton logo and can be
selectable startup screen. The default is the Eaton logo and can be
changed to the Mimic screen in the User Settings menu.
changed to the Mimic screen in the User Settings menu.
The backlit LCD automatically dims after a long period of inactivity. Press
The backlit LCD automatically dims after a long period of inactivity. Press
The backlit LCD automatically dims after a long period of inactivity. Press any button to restore the screen.
any button to restore the screen.
any button to restore the screen.
Use the two middle buttons ( and ) to scroll through the menu
Use the two middle buttons ( and ) to scroll through the menu
Use the two middle buttons (
structure. Press the
structure. Press the
button to enter a submenu. Press the submenu. Press the
to select an option. Press the
to select an option. Press the
ESC
button to cancel or return to the menu.
previous menu.
previous menu.
The following table shows the basic menu structure.
Table 5. Menu Map for Display Functions
Main Menu
56
Eaton 9355 Parallel UPS (10/15 kVA) User's Guide
Eaton 9355 Parallel UPS (10/15 kVA) User's Guide
S
164201601 Rev B
UPS Status
Event Log
Measurements
Control
Settings
Identification
Turn UPS ON/OFF
6 6 . . 1 1 . . 3 3 U U s s e e r r S S e e t t t t i i n n g g s s
The following table displays the options that can be changed by the user.
50 Eaton 9355 Parallel UPS (10/15 kVA) User's Guide 164201601—Rev E0
Display Functions
As the default or after 15 minutes of inactivity, the LCD displays the
selectable startup screen. The default is the Eaton logo and can be
changed to the Mimic screen in the User Settings menu.
The backlit LCD automatically dims after a long period of inactivity. Press
any button to restore the screen.
Use the two middle buttons ( and ) to scroll through the menu
structure. Press the and
button to enter a submenu. Press the
button to enter a submenu. Press the
to select an option. Press the
button button to select an option. Press the
ESC
button to cancel or return to the
ESC
button to cancel or return to the
previous menu.
Submenu
Eaton 9355 Parallel UPS (10/15 kVA) User's Guide
S
164201601 Rev B
S 164201601 Rev B
Parallel System
Output
Battery
Input
Bypass
Go to Bypass Mode
Start Battery Test
Display Test

User Settings

Service Settings
ON and OFF Options
NOTE Changes to the output voltage or frequency options should be made before turning on
the UPS; otherwise, the changes do not take effect.
) to scroll through the menu structure. Press the button to enter a submenu. Press the
ESC
Display Information or Menu Function
56
S
Eaton 9355 Parallel UPS (10/15 kVA) User's Guide 164201601 Rev B
System normal / Battery floating UPS in Parallel mode / Parallel Unit
Number x / Units on CAN Bus / Units on load
Displays up to 127 events and alarms
Voltage [by unit] / Voltage [Parallel total] / Output Voltage: L-N / Output
Voltage L-L / Output Current / Output Frequency / Output Power
L-N and L-L / Current / Frequency / Power
Voltage / Current / Runtime
L-N and L-L / Current / Frequency
L-N and L-L / Frequency
Transfers the UPS system to internal Bypass mode
When this command is active, the option changes to Go to Normal Mode.
Initiates a battery test
Four different selectable tests for the front panel functions: the LEDs
cycle through, the alarm beep sounds, the backlight turns off and on, and
the pixels scroll through to test the LCD.
See Table 6 for detail.
This screen is password-protected.
UPS Type / Part Number / Serial Number / Firmware / Display / CAN
Bridge
UPS Off / System On / System Off
Display Functions
As the default or after 15 minutes of inactivity, the LCD disp
selectable startup screen. The default is the Eaton logo and
changed to the Mimic screen in the User Settings menu.
The backlit LCD automatically dims after a long period of ina
any button to restore the screen.
Use the two middle buttons ( and ) to scroll through the m
structure. Press the button to enter a submenu. Press the button to enter a
button
button
to select an option. Press the button to cancel or return to the
button to cancel or return to the previous
previous menu.
S
164201601 Rev B
button
ESC
button to cancel or return