Sync Termination; Sync Type - Barco Duet II Owner's Manual

3. Push the cursor key ↑ or ↓ to highlight the desired Synchronization.
4. Press ENTER to confirm.
Note: The current Sync Selection is displayed on top of the menu.
Duet II Interface
Sync Select
Sync Term

Sync Type

Please select item
Menu 6-13
6.4.3

Sync Termination

What can be done?
Select the applicable Synchronization Termination.
Following Synchronization Terminations are available:
• 75 Ohm Termination
• High Impedance Termination
How to adjust the Sync Termination?
1. Push the cursor key ↑ or ↓ to highlight Sync Term. (menu 6-15)
2. Press ENTER to select.
The Sync Termination menu will be displayed. (menu 6-16)
3. Push the cursor key ↑ or ↓ to highlight the applicable Synchronization Termination.
4. Press ENTER to confirm.
Note: The current Sync Termination is displayed on top of the menu.
Duet II Interface
Sync Select
Sync Term
Sync Type
Please select item
Menu 6-15
6.4.4 Sync Type
What can be done?
Select the applicable Synchronization Type.
Following Synchronization Types are available:
• Analog Synchronization: 0.5 Vpp
• Digital Synchronization: 2.5 Vpp
How to adjust the Sync Type?
1. Push the cursor key ↑ or ↓ to highlight Sync Type. (menu 6-17)
2. Press ENTER to select.
The Sync Type menu will be displayed. (menu 6-18)
3. Push the cursor key ↑ or ↓ to highlight the applicable Synchronization Type.
R5976550 BARCO DUET II 10/05/2007
Duet II Interface
Current: Automatic
Automatic
HS & VS
Comp Sync
Sync On Green
Please select item
Menu 6-14
Duet II Interface
Current: 75 Ohm
75 Ohm
High Impedance
Please select item
Menu 6-16
6. Installation Mode
47