Power Connection; Switching On/Off - Barco Duet II Owner's Manual

3. Connections
12 Monitor Output
13
R(emote) C(ontrol) Input
14 LCD Display
Table 3-1
3.2

Power Connection

Power Cord Connection
The power input is auto-ranging from 90 to 240 VAC. Use the supplied power cord to connect your projector to the wall outlet. Plug
the female power connector into the male connector at the rear of the Duet II.
R G B
R G B
Image 3-2
Power Cord Connection
3.3

Switching On/Off

How to Switch the Duet II On?
1. Press the power switch to switch the BARCO Duet II On. (image 3-3)
'DUET II Interface' will be displayed on the LCD Display. (image 3-4)
Image 3-3
Power Switch
8
INPUT
H/C V
ID BIT IDENTIFICATION STEREO
H/C V R
DVI OUT
TO PROJECTOR 1
to wall outlet
COMMUNICATION
RS 232 IN RS 232 OUT
G B H/C V
DVI OUT
TO PROJECTOR 2
MAINS
R5976550 BARCO DUET II 10/05/2007