Duet Ii Address; Rcu Address - Barco Duet II Owner's Manual

4. Getting Started
Image 4-3
RCU Hardwired
4.5

Duet II Address

What is the Duet II Address?
Each Duet II can be set to an individual Duet II Address, this can be set between '0' and '255'.
Controlled by
Standard Barco Projector RCU
Computer (IBM PC or compatible, Apple, ...)
Default the Duet II Address is set to '9'.
How to set the Duet II Address?
To Adjust the Barco Duet II Address see "Change Duet II Address", page 52.
4.6

RCU Address

The RCU Address can be any digit between '0' and '9'.
How to set the RCU Address?
1. Press the recessed Address key with a pencil. (image 4-4)
The Duet II Address will be displayed (1 digit) on the BARCO Duet II LCD Display.
2. Enter the RCU Address by pressing a single digit key, within 5 seconds after pushing the address key.
Note: If no digit is entered within 5 seconds the RCU will return to the default '0' address.
22
RCU
Duet II Address
0–9
0–255
R5976550 BARCO DUET II 10/05/2007