Change Baudrate; Overtemperature Settings - Barco Duet II Owner's Manual

Or,
Push the cursor key ← or → to select the digit and change the value by using the cursor key ↑ or ↓ until the new value is reached.
Duet II Interface
Title Screen
Change Duet Addr

Change Baudrate

Overtemp settings
AMDS settings
DVI Output limit
Software version
Please select item
Menu 7-5
7.5 Change Baudrate
What can be done?
Change the Baudrate of the BARCO Duet II.
The following baudrates are available:
• 115200
• 57600
• 38400
• 19200
• 9600
• 4800
• 1200
How to Change the Baudrate?
1. Push the cursor key ↑ or ↓ to highlight Change Baudrate. (menu 7-7)
2. Press ENTER to select.
The Change Baudrate menu will be displayed. (menu 7-8)
3. Push the cursor key ↑ or ↓ to highlight the desired Baudrate.
4. Press ENTER to select.
Duet II Interface
Title Screen
Change Duet Addr
Change Baudrate
Overtemp settings
AMDS settings
DVI Output limit
Software version
Please select item
Menu 7-7
The current Baudrate is displayed on top of the menu.
7.6

Overtemperature Settings

What can be done?
A temperature Sensor is located inside the BARCO Duet II, whenever the temperature measured by the Duet II exceeds the Overtem-
perature Setting the Duet II will be switched to Standby.
R5976550 BARCO DUET II 10/05/2007
Duet II Interface
Duet Addr : 00009
Please select item
Menu 7-6
Duet II Interface
Current: 115200
115200
57600
38400
19200
9600
4800
1200
Please select item
Menu 7-8
7. Service Mode
53