Stereo Freerun - Barco Duet II Owner's Manual

6. Installation Mode
4. Press ENTER to confirm.
Note: The current Sync Type is displayed on top of the menu.
Duet II Interface
Sync Select
Sync Term
Sync Type
Please select item
Menu 6-17
6.5

Stereo FreeRun

What can be done?
When Stereo FreeRun is enabled and an external Stereo Sync signal is not provided or connected to the BARCO Duet II, a Stereo
Sync is provided internally by the BARCO Duet II, i.e. the BARCO Duet II will always provide an image, this will allow an easy setup
of the desired stereo application on the IG.
When the stereo application is set up on the IG, connect the Stereo Sync provided by the IG to the BARCO Duet II, this external
signal will override the internal signal.
It is advised to enable the Stereo FreeRun setting.
A correct stereo setup will only be guaranteed when connecting the Stereo Sync signal from the IG to the
BARCO Duet II.
How to adjust the Stereo FreeRun Setting?
1. Push the cursor key ↑ or ↓ to highlight Stereo FreeRun. (menu 6-19)
2. Press ENTER to select.
The Stereo FreeRun menu will be displayed. (menu 6-20)
3. Push the cursor key ↑ or ↓ to select the desired Stereo FreeRun Setting.
4. Press ENTER to confirm.
Duet II Interface
Output Parameter
Input Parameter
Stereo FreeRun
Auto Menu disable
Internal patterns
WND 264 Installed
Please select item
Menu 6-19
The current Stereo FreeRun Setting is displayed on top of the menu.
48
Duet II Interface
Current: Analog
Analog Sync
Digital Sync
Please select item
Menu 6-18
Duet II Interface
Freerun = On
Disable FreeRun
Enable FreeRun
Please select item
Menu 6-20
R5976550 BARCO DUET II 10/05/2007