Wnd 264 Installed - Barco Duet II Owner's Manual

6. Installation Mode
5. Press EXIT to return to Installation menu.
Duet II Interface
Output Parameter
Input Parameter
Stereo FreeRun
Auto Menu disable
Internal patterns

WND 264 Installed

Please select item
Menu 6-23
6.8 WND 264 installed
What can be done ?
When a Duet II is put in front of a Barco WND 264 i.e. when the output of a WND 264 is connected to the Duet II, this item must be
activated (select WND 264 Present). This is necessary to inform the Duet II on the possibly changing number of vertical lines of the
input signal (signal coming out of the WND 264).
How to activate the WND 264 installed menu ?
1. Push the cursor key ↑ or ↓ to highlight WND 264 Installed (menu 6-25)
2. Press ENTER to select.
The menu will be displayed (menu 6-26)
3. Push the cursor key ↑ or ↓ to select WND 264 present (menu 6-27)
4. Press ENTER to select.
5. Press EXIT to return to Installation menu.
Tip: If you return now to the WND 264 Installed menu, the text field will be adapted to WND 264 = Present
Duet II Interface
Output Parameter
Input Parameter
Stereo FreeRun
Auto Menu disable
Internal patterns
WND 264 Installed
Please select item
Menu 6-25
50
Duet II Interface
Outline
Phase Adjust
Checker board
Please select item
Menu 6-24
Duet II Interface
WND 264 = Absent
WND 264 Absent
WND 264 Present
Please select item
Menu 6-26
Duet II Interface
WND 264 = Absent
WND 264 Absent
WND 264 Present
Please select item
Menu 6-27
R5976550 BARCO DUET II 10/05/2007