Barco Duet II Owner's Manual page 14

3. Connections
When the Left/Right Image is correctly displayed, the 3D effect is much deeper and changing in perspective
when moving around while looking at the image.
When the Left/Right Image is NOT correctly displayed, one of the following actions can be performed:
• Change the 'To Projector' connections on the BARCO Duet II.
• Change the First Image Selection inside the BARCO Duet II menu (see "First Image Select", page 45).
• When applicable, change the settings on the IG.
In case mirrors are used to project the projector image, it depends on the setup which projector has to be
connected to which channel, contact Barco to advise you with the connections.
How to connect SIM6 Series Projectors to the BARCO Duet II?
On the front of the projectors, just below the two digit display, the SIM6 Series projectors are labeled with stickers.
3D Front L
3D Front R
3D Front LC
3D Front RC
Connect the BARCO Duet II Outputs to the SIM6 Series projectors according to the table below to get High Quality 3D images.
10
Linear Polarization Left
Linear Polarization Right
Circular Polarization Left
Circular Polarization Right
R5976550 BARCO DUET II 10/05/2007