Table of Contents
Advertisement
1. Safety Instructions
combustible materials to the close proximity of this BARCO product could result in the spontaneous ignition of that material, resulting
in a fire. For this reason, it is absolutely necessary to leave an "exclusion zone" around all external surfaces of the BARCO product
whereby no flammable or combustible materials are present. The exclusion zone must be not less that 10 cm (4") for Barco Retro
Projectors. Do not cover the BARCO product with any material while it is in operation. Keep flammable and combustible materials
away from the BARCO product at all times. Mount the BARCO product in a well ventilated area away from sources of ignition and
out of direct sun light. Never expose the BARCO product to rain or excessive moisture. In the event of fire, use sand, CO
dry powder fire extinguishers; never use water on an electrical fire. Always have service performed on this BARCO product by
authorized BARCO service personnel. Always insist on genuine BARCO replacement parts. Never use non-BARCO replacement
parts as they may degrade the safety of this BARCO product.
On Installation
•
Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious damage to it.
•
Do not use this equipment near water.
•
Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable operation of the product
and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator
or heat register. The BARCO product should not be placed in a built-in installation or enclosure unless proper ventilation is
provided.
•
Do not block the equipment's cooling fans or free air movement under and around the BARCO product. Loose papers or other
objects may not be nearer to the BARCO product than 4" on any side.
On Servicing
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage potentials and
risk of electric shock!
Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
•
When the power cord or plug is damaged or frayed.
•
If liquid has been spilled into the equipment.
•
If the product has been exposed to rain or water.
•
If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are
covered by the operating instructions since improper adjustment of the other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to normal operation.
•
If the product has been dropped or the cabinet has been damaged.
•
If the product exhibits a distinct change in performance, indicating a need for service.
•
Replacement parts: When replacement parts are required, be sure the service technician has used original BARCO replace-
ment parts or authorized replacement parts which have the same characteristics as the BARCO original part. Unauthorized
substitutions may result in degraded performance and reliability, fire, electric shock or other hazards. Unauthorized substitu-
tions may void warranty.
•
Safety check: Upon completion of any service or repairs to this BARCO product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
On Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning. To keep the cabinet looking brand-new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth
lightly dampened with mild detergent solution. Never use strong solvents, such as thinner or benzine, or abrasive cleaners, since
these will damage the cabinet.
On Repacking
Save the original shipping carton and packing material; they will come in handy if you ever have to ship your equipment. For maxi-
mum protection, repack your set as it was originally packed at the factory.
4
R5976550 BARCO DUET II 10/05/2007
, or
2
Advertisement
Table of Contents
